A QUICK OFFICE FACE LIFT PROJECT-LEATHER PANELS (PART 1)

3d-leather-tiles-1

Hello everyone,
I just wanted to share with you our latest project ( in fact it was completed today – Dec 2, 2014 )
Place – Russian Guide’s main office in Toronto, Ontario.
We were asked to install our Leather Panels in Mr. Oleg Nakarikov’s office.
This is how the office looked before we started:

office-before

This is the tile that we choose to install – it called LT-86 Caramel.

tile -lt-86-сaramel

We thought that the color of this model will complement the walls and furniture.
The 3d leather tiles were glued to the wall with combination of hot glue (for an immediate grab) and cove based adhesive by Titebond.
Here you can see how the back wall looked an hour and a half later.

3d-leather-tiles

The only tools that were used – level , pencil, measuring tape, caulking gun and hot glue gun.
The total cost of the project – 24 panels – $596 , 1 tube of glue – $8 plus 1.5 hour labor – $50.

Total – $654

In the part two of the article we’ll show how we finished the ceilings in the lobby. And if you have any questions about this installation – please contact us at 1-888-717-8453 and we’ll gladly answer all your inquiries.
Thanks for reading.

Leave a Reply

Your email address will not be published. Required fields are marked *