FAUX TIN PVC BACKSPLASH ROLL – INSTALLATION INSTRUCTIONS

You will need the following tools for the job:

  • Adhesive
  • Foam roller
  • Tray for the adhesive
  • Measuring tape
  • Exacto knife/scissors
  • Pencil

INSTALLING TILES IN MULTIPLE ROWS

  1. Measure the total length of the piece you need to install. Cut the piece at the desired length.
  2. Fit the piece under the cupboards (you can cut the roll with scissors)
  3. Apply the adhesive (solvent based Contact Cement) on the back of the PVC backsplash roll and on the wall that you are installing on
  4. Let the glue dry (2-4 minutes) until it become “tacky” and attach the piece to the wall. Squeeze out all the air from behind the roll.